No products in the cart.
How to Adjust an Acoustic Guitar Truss Rod
When a guitar leaves the factory, the truss rod is adjusted according to the specs and strings gauge on the guitar. But a change in string gauges, climate (especially a change in humidity, and Newfoundland is wicked for it), or simply the player’s taste may require an adjustment, even on a new guitar. If you have a guitar that played great when you got it, but has developed a higher, stiffer action over time, it may be time to learn how to adjust your truss rod so you can keep the action just the way you like it.
An adjustable truss rod is a slim steel rod embedded in the neck. One end is threaded for an adjusting nut and is accessible at either the headstock or through the soundhole. The other end is anchored to give the adjusting end something to tighten against.
There are two styles of adjustable truss rods: single-action (“one way”) truss rods, and double-action (“two way”) rods. One-way rods straighten the neck against string tension and up-bow; two-way rods not only straighten the neck against up-bow, but can also force a back-bowed neck into either a straight or up-bowed configuration.
Your truss rod needs adjustment when the neck of your guitar has too much or too little up-bow, or too much back-bow.
(Adjustments are opposite if the adjustment nut is at the headstock)
Tightening or loosening the adjustment nut adds or lessens pressure on the rod and neck. As a general rule,tightening the nut moves the neck away from the strings and brings the neck "down".while loosening the nut allows the neck to relax and moves the center of the neck "up".
When a bow is purposefully pit in a neck at a controlled bow, it's known as relief.
However, with a one-way truss rod, if the neck warps away from the string pull, no amount of loosening the truss rod will pull the neck straight, because the truss rod only works against the pull of the strings. This is why now, for the most part, double-action truss rods are used.
Two primary signs tell you that your truss rod needs adjusting:
- There’s a noticeable change in the action; the height of the strings over the frets has become either too high or too low. The most common scenario is that the strings get higher as the neck bows from the string tension.
- Some strings buzz on the frets between the nut and the fifth fret. This indicates that the neck is either too straight or has become back-bowed over time.
Leave a comment
